The BTG transponder is a battery-less free programmable read-write transponder operating the a low frequency (134 kHz) to avoid disturbance by water, snow, ice etc.
The 50 mm glass transponder is protected by a silicon sleeve.
Installation is very easy by drilling 25 mm diameter holes. For programming see page "Programming Tool".
BTG will launch a Transponder installation Robot soon.
The RFT060-GL-SIL is a battery less Read-Write transponder, operating in the low frequency (134,2 kHz) range. This transponder is unique because of his large reading distance and steep signals to make it possible to do very accurate position measurements.
The lip-stick size transponder will be installed easily in the ground by drilling 25 mm holes and will be programmed with it’s position code by means of the BTG Programming Tool. The transponder can be freely programmed with an 64bit value. The glass transponder is protected by a silicon sleeve.
During operation the BTG Sensors will charge the transponder, reads out its position code and determines the position of the transponder under the system. The system works contact-less so the transponder does not wear with unlimited lifetime.
Using this transponder BTG is worldwide the leading company for position measurement of AGV’s in the automated Ports.